The feature of Non-avoiding parking equipment
1. Unnecessary to wait while parking and much more convenient to take
car out.
The upper-layer deck move toward to the
road through the rail which are fixed on the ground and make a
orthogonal turn when the upper-layer deck reached the end. Then It
will descend Vertically to the ground waiting for loading a car or unloading a car.
Comparing with common combilift non-avoiding parking system does
not have a narrow gate which is shaped by the chain or wire rope ,
so parking or taking a car from this equipment will be much easier
and more efficient.
2. more guarantee of reliability
Transmission part of the equipment are
made of high intensity screw stem instead of chain or wire rope.
The screw stem has a function of self-lock which means the
upper-layer deck will never fall off or descend too quickly because
of the screw stem are holding the deck all the time, this design
increase the reliability in daily usage.
When the equipment is working each
motion is controlled by a Separated dynamic system , we use PCL
program to control 3 motors in the equipment to complete the whole
process.
3. Double the Utilization of space
This parking equipment enables 2
cars to park at the same time, any of the car will be free
to move out at any time , as long as there is electricity.( in case
of power failure please
refer below)
4. Specific property right
After installation of this parking
equipment each parking space will be independent and specific , so
you may choose to sale or lease to your clients.
5. Reduce the possibility of malfunction
Each parking equipment is working
independently and the other units will not be affected
even if one unit is out of function. normal parking equipment will
break down even a
single unit is out of function , because each unit is associated to
each other.
6. Enable manual operation in case of power failure
Use the hitch manually from the
equipment to release the upper-layer deck to the ground when there
is no electricity or power failure. Ground space empty will be the
premise!
Release the car from above takes 5 minutes , return the deck back
to the upper-layer takes 20minutes.
7. Less space occupation
This parking equipment can be
directly installed above the ground. Widely used along the
road, under the garage , parking area of supermarkets , shopping
mall, hospital , banks and so on…
Parking Procedure (Parking on the upper deck)
1. The vehicle awaits parking, the upper deck moves forward
along the rail, can turn left or right if need, and descends
smoothly.
2. The vehicle moves onto the deck
and the driver disembarks.
3. The deck rise, turn right or left if need, and
draw back along the rail.
When the vehicle parked on the upper deck is required, the
procedure for retrieval from the upper deck is reversed.
The ground level deck is as stable as a natural land parking space,
there is no mechanical movement.
The vehicle parked on the landed deck does not need to be removed
if the upper deck is moving.
All procedures of the machine are controlled by the
operator.
Technical Parameters
| （Outdoor） | （Indoor） | Memo |
|
Landed Size (L*W) | 5500 mm * 2600 mm | |
Height | 3800 mm | 3500 mm | Height of track base uncluded |
Road Width Need | ≥3.8m | |
Net Weight | about 1.7 T | Weight of track base uncluded |
|
Size of Upper Deck (L*W*H) | 5000*1950*1550 (mm) | 5000*1950*1550 (mm) | |
Load Limit of Upper Deck | ≤2000 kg | ≤1700 kg | |
Size of Landed Deck (L*W*H) | 5000*1950*2000(mm) | 5000*1950*1700(mm) | |
|
